GREEN HEAVY CUT FOAM PAD | 5" & 6"
Tax excluded. Shipping calculated at checkout
The GlossTech Green Heavy Cut Foam Pad uses a balanced medium‑density foam to deliver controlled cutting and refined finishing in one step. Its consistent cell structure maintains even pressure, helping reduce micro‑marring and holograms while improving abrasive performance. Compatible with dual‑action and forced‑rotation polishers, this pad offers stable operation, reliable correction of light to moderate defects, and a clean high‑clarity finish across a wide range of paint systems.
- Balanced cut-and-finish performance for light to moderate defect removal
- Optimized for use with compounds and one‑step correction systems
- Available in 5” & 6” pad sizes
- 5" Pad Diameters: Hook & Loop: 136mm (5.3in) | Pad Face: 136mm (5.3in)
- 6" Pad Diameters: Hook & Loop: 160mm (6.3in) | Pad Face: 160mm (6.3in)
- Made in the USA
GREEN HEAVY CUT FOAM PAD | 5" & 6" PRODUCT INFO
DIRECTIONS
Prior to washing, make sure vehicle panels are cool, out of direct sun. Do not allow ProSeries Refresh Wash to dry on vehicle surfaces, especially glass.
1) Dilute 1:128 (or 1 oz to 1 Gallon) for Maximum Decon or 1:256 (or 1 oz to 2 gallons) for Standard Cleaning in a bucket filled with water. Dilute 1:32 in a foam cannon for a Maximum PreSoak Foam Party.
2) Before washing, thoroughly rinse the vehicle to remove all loose contamination.
3) If using a foam cannon: evenly spray the vehicle in foam to break down dirt & grime and lubricate surfaces.
4) Dunk a microfiber wash mitt, or a microfiber towel, in the bucket to add plenty of soap to the panel.
5) Wash the vehicle in straight overlapping lines, working from the top down.
6) After washing all surfaces, thoroughly rinse all surfaces with running water from the top down.
7) Dry the vehicle by blowing water off vehicle surfaces with air and/or hand dry the vehicle with the microfiber drying towel.
8) For best results, use a leaf blower or compressed air to dry hard to reach areas.
9) Enjoy your clean vehicle
FAQ
Q: Is ProSeries Refresh Wash safe for coated vehicles?
A: Yes, ProSeries Refresh Wash is ideal to maintain a ceramic coating's optimal hydrophobic properties, allowing the coating to perform at its best.
Q: Can I use ProSeries Refresh Wash on a PPF/Clear Bra or vinyl wrap?
A: Absolutely, ProSeries Refresh Wash is safe for all automotive surfaces, including paint, exterior plastics, glass, gel coat, PPF/Clear Bra, and vinyl wraps.
Q: Will ProSeries Refresh Wash leave residue?
A: No. ProSeries Refresh Wash is formulated to dry streak-free without leaving any residue behind.
Prior to washing, make sure vehicle panels are cool, out of direct sun. Do not allow ProSeries Refresh Wash to dry on vehicle surfaces, especially glass.
1) Dilute 1:128 (or 1 oz to 1 Gallon) for Maximum Decon or 1:256 (or 1 oz to 2 gallons) for Standard Cleaning in a bucket filled with water. Dilute 1:32 in a foam cannon for a Maximum PreSoak Foam Party.
2) Before washing, thoroughly rinse the vehicle to remove all loose contamination.
3) If using a foam cannon: evenly spray the vehicle in foam to break down dirt & grime and lubricate surfaces.
4) Dunk a microfiber wash mitt, or a microfiber towel, in the bucket to add plenty of soap to the panel.
5) Wash the vehicle in straight overlapping lines, working from the top down.
6) After washing all surfaces, thoroughly rinse all surfaces with running water from the top down.
7) Dry the vehicle by blowing water off vehicle surfaces with air and/or hand dry the vehicle with the microfiber drying towel.
8) For best results, use a leaf blower or compressed air to dry hard to reach areas.
9) Enjoy your clean vehicle
Q: Is ProSeries Refresh Wash safe for coated vehicles?
A: Yes, ProSeries Refresh Wash is ideal to maintain a ceramic coating's optimal hydrophobic properties, allowing the coating to perform at its best.
Q: Can I use ProSeries Refresh Wash on a PPF/Clear Bra or vinyl wrap?
A: Absolutely, ProSeries Refresh Wash is safe for all automotive surfaces, including paint, exterior plastics, glass, gel coat, PPF/Clear Bra, and vinyl wraps.
Q: Will ProSeries Refresh Wash leave residue?
A: No. ProSeries Refresh Wash is formulated to dry streak-free without leaving any residue behind.
PRODUCT BENEFITS
BENEFIT 1
SAFE MAINTENANCE CLEANING FOR PROTECTED VEHICLES
GlossTech ProSeries Refresh Wash uses a pH-balanced formula to safely remove dirt, dust, and road film without stripping ceramic coatings, sealants, or wax protection.
BENEFIT 2
ENHANCES GLOSS, SLICKNESS, AND HYDROPHOBICS
Refresh Wash helps maintain the appearance and performance of protected surfaces by boosting gloss, preserving slickness, and supporting water-beading properties after every wash.
BENEFIT 3
HIGH-FOAMING LUBRICATION REDUCES SCRATCHING The rich, concentrated foam encapsulates contamination and provides superior wash lubrication, allowing wash media to glide smoothly across surfaces to minimize marring and wash-induced scratches.
For more shine also consider...
